Mercedes-Benz Car Electronic Power Steering Rack 4474602900 For Benz V V220CDI 4-Matic /VITO Box (W447) 114 CDI 2014

Mercedes-Benz Car Electronic Power Steering Rack 4474602900 For Benz V V220CDI 4-Matic /VITO Box (W447) 114 CDI 2014

 

Product Description

 

Product name	Auto steering rack
Car Make	Mercedes-Benz Benz V V220CDI 4-Matic /VITO Box (W447) 114 CDI 2014
OEM No.	4474602900
Drive Side	LHD
Operating Mode	Electronic
Warranty	12 months
Delivery time	3-15 days
Packing	Neutral Bubble bag + Cartons

 

Benz V-CLASS V220CDI Power steering rack

 

1. How does steering rack work

 

Rack and pinion steering uses a gear-set to convert the circular motion of the steering wheel into the linear motion required to turn the wheels. It also provides a gear reduction, so turning the wheels is easier.

It works by enclosing the rack and pinion gear-set in a metal tube, with each end of the rack sticking out from the tube and connected to an axial rod. The pinion gear is attached to the steering shaft so that when the steering wheel is turned, the gear spins, moving the rack. The axial rod at each end of the rack connects to the tie rod end, which is attached to the spindle.

 

Most cars need three to four complete turns of the steering wheel to go from lock to lock (from far right to far left). The steering ratio shows you how far to turn the steering wheel for the wheels to turn a certain amount. A higher ratio means you need to turn the steering wheel more to turn the wheels a certain amount and lower ratios give the steering a quicker response.

Some cars use variable ratio steering. This rack and pinion steering system uses a different number of teeth per cm (tooth pitch) in the centre than at the ends. The result is the steering is more sensitive when it is turned towards lock than when it is close to its central position, making the car more maneuverable.

There are two main types of rack and pinion steering systems:

End take off – the tie rods are attached to the end of the steering rack via the inner axial rods.
Centre take off – bolts attach the tie rods to the centre of the steering rack.

 

Common Fault Determination for Steering rack

 

1. Fault determination of heavy steering

(1), first of all, check whether there is lack of oil, whether the filter element is damaged, whether the pipeline is blocked

(2) when the left and right steering feel is different, should have nothing to do with the pump, first check the steering connecting rod mechanism and steering machine.

(3), the steering process feels uneven power, when heavy and light, first check the steering machine.

(4) Test the output pressure of the steering pump with the help of the pressure detection device.In addition: cold car state at low speed direction is heavy or no rotation, step a few throttle or operation for 2/3 minutes can be eliminated, this is due to the oil viscosity at low temperature is large, the centrifugal force at low speed is small, the rotor blade is not thrown out caused by, is a normal phenomenon.

 

2. Fault determination of oil leakage

(1) There are old oil stains and no signs of development, which is a normal phenomenon.

(2) It is normal to touch the part with oil without obvious humidity.

(3) Oil leakage at the joint of pump and tubing is usually caused by damage of the sealing ring (pad) of connection loose cargo, tightening or replacing the sealing ring (pad).

(4) If the steering pump leaks oil in other locations and there are signs of development, the steering pump needs to be replaced.

 

3. Fault determination of abnormal sound of steering system

(1) The sound made when the steering wheel is killed is the sound of the steering pump safety valve opening, which is a normal phenomenon.(Note: Don't beat the steering wheel to one side for more than 10 seconds.)

(2) Air leakage in the pipeline of the steering system (there are bubbles in the oil can at this time) and lack of oil will also cause abnormal sound of the steering pump.

(3) in winter, there is abnormal sound in a short time after the cold car starts, and it disappears after the hot car, which is a normal phenomenon.

(4) abnormal sound does not change with the rotation of the steering wheel, which is generally not a problem with the steering pump.

(5) When the steering is abnormal in one direction or a certain position, it is necessary to focus on checking the steering connecting rod mechanism and steering machine.

 

We have all kinds of power steering rack for your choose from

Pls provide the OEM and pictures for confiming the right model you need.

For more details the inquire are highly welcome.

 

 

Delivery &Parking

 

 

 

 

Our Service

 

1. Reply your inquiry in 24 working hours.

2. Once you place order to us, our stuff will track your order, let you know the newest process until you have received it.

3. Deliver the goods to our customer with speed and precision.

4. Offer customer good price with high quality product.

5. One-stop purchase platform for Auto parts helps you lower your purchasing cost of the parts

 

FAQ

 

Q1. How many years have your company deal in autoparts?

A: We have been founded for 20 years now

Q2. What is your company major products?

A: Our main products are Steering rack, steering pump, Brake Pad, Oil Fiter. Fuel Filter, Air Fiter, Shock Absorber, Control Arm, brake disc, brake master cylinder ,clutch parts, engine parts ,body parts, modified parts , truck parts etc.

 

Q3. Are you a factory or trading company?

A: We are Manufacturing and Trading company, we have several factories

04. What is the MQQ?

A: Normally we can supply any quantity if we have stock.

05. What is the delivery date?

A: It takes 1-7 days if there is stock, but takes about 7-35 days if there is no stock.

Contact Information

 

Welcome your inquiry for more details and better price or Via my WeChat or WhatsApp for communication

 

Contact Name: Winnie Chen

Email:Winnie@benmagroup.com

Tel/Whatsapp/Wechat +86-15215082574